Highwaykick 1 Push and Go brake, spare part

How to replace the brake on your Highwaykick 1 Push and Go

The brake on your Highwaykick 1 Push and Go is worn out and needs to be replaced? We'll explain how:

1. Start by removing the screw on the seat bracket
2. Then turn the scooter upside down
3. Remove the underside of the footboard and carefully take it off
4. Remove the two screws holding the brake in place and remove it
5. Now put in the new brake and tighten both screws
6. Reinstall the footboard and then attach the seat bracket

It's that easy! Now your Highwaykick 1 Push and Go is ready to use again. 

Don't understand a step in the explanation? No problem! Our video explains how to replace the brake step by step.

Here you can watch our video tutorial